(1) walking Sijia maximum processing efficiency
Due to the large peak current level ns pulse power technology and testing, control, develop anti-jamming technology, low speed WEDM wire walking processing efficiency is constantly improving.
(2) a greater thickness of the workpiece processing efficiency
Mitsubishi Electric Corporation FA-V series machines when cutting 300 mm thick workpieces, the processing efficiency of up to 170 mm2 / min. This is very meaningful technological upgrading.
(3) The thickness variation of the workpiece machining efficiency
Automatically detects the thickness of the workpiece, automatically adjusts the processing parameters, to prevent broken wires, the highest processing efficiency of the state.
(4) Two-wire automatic exchange technology
ROBOFIL 2030S1-TW machine can use 0.20 ~ 0.02 mm wire electrode automatically double Siqie exchange processing. Coarse filaments are first cut, usually wire diameter of 0.25 mm, in order to improve processing efficiency, and cutting non-core; then trimmed using filaments, generally 0.10
mm filaments, cut out a small corner, and improve accuracy. The overall savings of 30% to 50% of cutting time.
(5) Quick automatic threading technology
Automatic threading time <15 s; Sodick company said threading time of 13 s Mitsubishi Electric Corporation, when a thickness of 50 mm, threading time is 10 s, shred, total time threading is 25 s.